bms
New Member
Posts: 1
|
Post by bms on Sept 16, 2020 14:18:00 GMT
I've not used the my Pro Edge in several months. Now I have come to reuse I need to align the belt, but, unable to move either the Spindle shaft or collar, both seem locked solid. Never had this problem before. An application of WD40 overnight, but neither will budge. Any suggestions to release the offending parts.
|
|
|
Post by Pete on Sept 16, 2020 15:07:35 GMT
No experience to assist with, but ignore the spindle for the start, put a tommy bar un each side of the collar and try to loosen it with the benefit of both hands. Once it is loosened from locking the spindle you should be able to put a tommy bar in each and adjust one against the other easily enough.
|
|