|
Post by Ken S on Oct 3, 2017 18:46:59 GMT
Ok Mr. Brooks How do I get a set of jaw screws? I'm not sure I will have Pete's luck but I shall try! Ken S Idaho Falls, Idaho USA.
|
|
|
Post by Clive Brooks on Oct 4, 2017 7:56:09 GMT
Hi Ken
Please email sales@robert-sorby.co.uk so we can discuss your question of the screws
|
|
|
Post by Pete on Oct 4, 2017 9:40:45 GMT
Blimey Ken, it's taken you 2 years to lose that screw... well done! as I am on the other side of the puddle (UK) it doesn't make sense for me to send you one. Contact Sorby direct as Clive said and hopefully they will be able to hook you up. if not then most engineering supplies shops sell machine screws, I am sure that if you walk in with one you will walk out with a bag of them. until then you need to make lots of small stuff that fits onto the 35mm (1¼")jaws as they only have one screw each :-)
|
|
|
Post by lakeman on Mar 10, 2021 21:48:49 GMT
The T key supplied with my Patriot chuck is slipping in one of the screws. It work's perfectly in the other. Any suggestions or are spares available?
|
|
|
Post by Pete on Mar 12, 2021 16:30:49 GMT
Hi Lakeman
Sorry for the late reply, I have been busy. Yes you can buy replacement screws. Please email sales@robert-sorby.co.uk or check your local Robert Sorby dealer.
Pete
|
|
|
Post by woodster on Feb 8, 2023 14:32:34 GMT
Very old post I know but I thought I’d just say that I bought a new Chuck a while back and I was pleased to see it came with Torx screws for the Jaws.
|
|