hb
New Member
Posts: 5
|
Post by hb on Apr 15, 2020 9:52:10 GMT
Hello all, I'm brand new to this forum and have just purchased my Robert Sorby ProEdge last week. So please excuse my very newbie questions!
I've received a BACK/WEARPLATE COMBINATION accessory with my machine. I have no idea what it's purpose is or what to use it for. Can anybody please shed some light?
|
|
|
|
Post by francis on Apr 15, 2020 9:54:09 GMT
Whats does it look like ?
|
|
|
|
Post by Pete on Apr 15, 2020 14:39:33 GMT
Hi HB Do you mean this one WPEBPLATE I suspect you may possibly have the knife jig with your sharpener, this has a separate backplate so you will have two! basically you swap to the shorter one when not sharpening knives. If I have guessed wrong, then the link to consumable / spare parts should give you the part number to confirm what you are talking about... Pete |
|
hb
New Member
Posts: 5
|
Post by hb on Apr 16, 2020 13:57:04 GMT
Hi HB Do you mean this one WPEBPLATE I suspect you may possibly have the knife jig with your sharpener, this has a separate backplate so you will have two! basically you swap to the shorter one when not sharpening knives. If I have guessed wrong, then the link to consumable / spare parts should give you the part number to confirm what you are talking about... Pete Hi Pete Thanks for getting back to me. I didn't get the knife jig with it. Just the flat chisel tool, short tool platform and the extra backplate. |
|
hb
New Member
Posts: 5
|
Post by hb on Apr 16, 2020 13:58:50 GMT
Whats does it look like ?    |
|
|
|
Post by Pete on Apr 16, 2020 17:21:34 GMT
|
|
|
|
Post by Clive Brooks on Apr 17, 2020 7:24:34 GMT
Good morning hb...It looks like you have thrown us all into a slight confusion regarding the additional backplate/wearplate you have with your new ProEdge...As Pete correctly says the part you have is one of three items included in the ProEdge knife sharpening kit and isn't normally sold as a individual item...Please can you email me directly at sales@robert-sorby.co.uk so that I can discuss this further with you...
|
|
hb
New Member
Posts: 5
|
Post by hb on Apr 17, 2020 8:00:26 GMT
Hi Pete, I've double checked, definitely don't have the knife sharpening system. I got the short tool platform with arm, the chisel sharpening jig and this backplate. I see Clive has contacted me so i'll further discuss with him. Thanks for assisting! |
|
