|
|
Post by madman243 on Sept 17, 2018 15:24:57 GMT
Is there a angle guide for a b842 to get the proper edge?
|
|
|
|
Post by Pete on Sept 17, 2018 21:33:57 GMT
What sharpening system are you using? I have the Tormec system at the moment, and that has a suitable jig, I am also looking at changing to the Sorby system which I had a play with recently, and that also has a jig as you would expect.
If you are not using either of those systems then the marker pen method with whatever system you are using will work.
|
|
|
|
Post by Clive Brooks on Sept 19, 2018 8:30:18 GMT
Hi Madman243....The B842 is our standard HSS Bowl gouge....which type of profile do you want on your gouge...standard or fingernail? The bevel angle is factory set to 45 degrees...Depending on which sharpening system you are using, and which profile you want on your gouge will determine how you achieve this
Let me know and I will try to assist you further
|
|
